Christmas Tree Star Topper Pattern

Christmas Tree Star Topper Pattern

Size G Hook (4.25 mm)
1 skein Red Hart Super Saver or worsted weight yarn
Polyfil Stuffing
Pipe Cleaners (for the stand)

Abbreviations:
sc - single crochet
st - stitch
tog - together
dec - decrease

Main Part (make 2):
*MAR* (magic adjustable ring)
Rnd 1: 6 sc into ring (6)
Rnd 2: 2 sc into every st (12)
Rnd 3: *1 sc for 1 st, 2 sc into next stitch* (18)
Rnd 4: *1 sc for 2 sts, 2 sc into next stitch* (24)
Rnd 5: *1 sc for 3 sts, 2 sc into next stitch* (30)
Rnd 6: *1 sc for 4 sts, 2 sc into next stitch* (36)
Rnd 7: *1 sc for 5 sts, 2 sc into next stitch* (42)
Rnd 8: *1 sc for 6 sts, 2 sc into next stitch* (48)
Rnd 9: *1 sc for 7 sts, 2 sc into next stitch* (54)
Rnd 10: *1 sc for 2 sts, 2 sc into next stitch* (60)
**END (Cut the first one ONLY.)

Points of Star (5 total):
*Take both circles that you've made. Put the wrong sides together.
Rnd 1: 12 sc one one circle, 12 sc on the other circle (24)
Rnd 2 - 3: 1 sc around (24)
Rnd 4: *1 sc for 1 st, 2 st tog (dec)* (16)
Rnd 5 - 7: 1 sc around (16)
Rnd 8: 2 st tog around (8)
Rnd 9: 1 sc (8)
**END. Weave in end to point.

This should make a star that is approximately 5" tall. This hasn't been tested except for me making my own as I went along. If you have any questions leave a comment and I'll get back to you a.s.a.p. You can make this for personal use only. Thank you!

Umbrella Kanzashi

Here's a new kanzashi. I recently made a shirt and a skirt for my sewing class. I finally got the shirt back and can wear the two together like they were made to be. =) I decided that I needed something for my hair to put it all together nicely. The skirt is made from the umbrella fabric and the shirt the tan fabric. Both pieces also have the same ribbon on it; while the shirt has the same buttons on it. Like the other headband creations I have made this to be able to go onto another ribbon or small headband. What do you think? Should I post the whole thing together when I wear it on Sunday? ;)

Craft Dump

I've been so far behind on posting on the blog about my recent craftiness. This post will probably be HUGE. I'm sorry! D= (Anything seen here can be remade. All you had to do it request it on my Etsy. ;) )

This is Frank. I wanted to make a plushie completely out of felt that was Halloween themed, and since I love Frankenstein by Mary Shelley I thought I would make him. I know he's not true to the monster in the book but I guess I took some creative liberties by making him how I wanted him to look.

These next two were gifts for an aunt. Her costume is Steampunk but she doesn't have any accessories that she could wear with it. I decided to make the bracelet first. I wanted to use kanzashi to make something feminine with edgy side. I like the contrast between soft and hard in the materials to the shapes. The wire wrapping and chain making was interesting since I didn't have any pliers. Needless to say my fingers were raw after making it. >.< The ring came after the bracelet. While making the gears for the flowers I had an extra. (All made out of Cold Porcelain clay. Clay I made from scratch!) Then it was painted and had wire hot glued to the back for it to be adjustable.

I held a contest on my deviantART page. The winner had to get an image of my 7,000 page view (along with other information) and then note it to me. The winner actually didn't know what she wanted so I had to nudge her in a direction. At first I mentioned Halloween theme and then she said that was good or something like a panda. So, I made a panda using purple and white instead of the normal color combo. It's about 3.5" tall. It's on its way to Tunisia right now! I hope it makes it safely. *crosses fingers*

While I was making the panda, I made these pumpkin earrings. I thought they would be a nice touch to wear on Halloween and during the Fall season. I almost put Jack-O-Lattern faces on them but I wouldn't wear them any time but Halloween then. I'm actually wearing them right now and they're super light and easy to wear. =)

This was actually made a long time ago. It's a Rabbid from the Raving Rabbid series by Ubisoft. I love these guys. They make me laugh so much. xD I made him in mind of my other felt key chains so they could be put together.

And finally I made this yesterday. This is a Weighted Companion Cube from the game Portal. I love watching the boys play the game and wish I could do it myself. I've been scared to because I know it will be frustrating. Perhaps some day I will try. This also was made to match my other felt key chains so they could be put together on the same key ring.

Trick or Treat Bag

I meant to create this bag for my son a year ago--- but with being 8 months pregnant and moving into our new house it took a back seat. This year is different! Here's a simple and fun way to make the kiddos in your life their own Trick or Treat bag!


Supplies:

• 1 yd of two coordinating Halloween fabrics (if you just want to make the bag get 1/2 yard)
• 1/4 yd heavy weight iron-on interfacing
• Halloween-y thread
• Sewing Notions

Instructions:

1. Cut out your pieces. You'll need 2 of everything in both fabrics. 12" x 7 1/2" (LARGE) rectangle, 12" by 3 1/2" (SMALL) rectangle, and 1 1/2 x 19 1/2 for the straps.
2. Pair opposite fabric straps to each other and sew along both 12" sides with 1/4" seam allowance. Turn inside out, press and sew finishing stitches along each 12" side again. Set aside.
   
3. With RIGHT sides together, pin one L rectangle to one S rectangle along a 12" side. Do with all four pairs. Sew together. You should now have four large squares.
4. Press out, then cut two pieces of interfacing to match size of your two outer squares. Press to bond interfacing. Then sew a finishing stitch just above second fabric (pictured in last photo).
5. With right sides together, sew the similar squares together. DO NOT sew around the top. Outside to outside and lining to lining. Leave a 3-4" gap at the bottom of the inside lining fabrics. (My hole was a bit to small).
6. OPTIONAL: If you want your bag to stand, match side and bottom seams to form a point. Sew a straight stitch 1" down from the point. Double stitch for added strength. Trim off the point and repeat for three other corners. (FYI: this is call Mitre corners).
7. Now it's time to put it all together. With the WRONG side OUT on the outer fabric, pin the straps 3" from the seam. I did matching fabrics facing each other, but you can do opposite. That's the beauty about this bag!
8. Turn inner lining RIGHT side OUT, tuck inside the outer fabric. The right sides should be together. Repin straps through the lining too and stitch along the top of the bag.
9. Pull bag right side out through the opening in the lining, arrange the bag, press and complete the bag with a finishing stitch!
10. Don't forget to hand stitch the opening in the lining. I did and remembered a few days later. I was just too excited to give the bag to my little boy!

You're done. Now all you have to do it convince your little trick-or-treater not to carry in around the whole month of October! Good Luck!

Do you recognize the fabric? I used the extra to make my pumpkins and will finish off the coordination with a table runner!

I'm using this tutorial as an entry for this... wish me luck! Hopefully, I'm chosen!

U-Create Create with Me: Fabric Pumpkins

I took at crack at making some Halloween Fabric Pumpkins with Kari over at {U-Create}.

Super simple! Here's the {tutorial}. I added my own personal touch by using fun Halloween fabric and using fleece to make the face on the green one.

If you have minimal sewing skills and a machine--- this project is perfect for fall! You can even make gifts for neighbors and friends!

Family Night 1-2-3

About a year ago, I read about this idea in the {Ensign}. I knew it would help us improve in having more habitual {Family Home Evening}.

FHE, 1-2-3!

The original idea called for glass jars... FHE Jars. I really want to have glass for something I knew my young kiddos would freqently touch (I kept imagining glass shards flying all across our tile), so I waited to make the craft until I came across the perfect plastic containers. Thank you, Crystal Light!

Supplies: 3 plastic containers (I reused our old Crystal Light containers), larger container to hold them in (I got mine at Hobby Lobby in the clearance section), large Popsicle sticks, 3 sheets of scrapbook paper, spray adhesive, sticky velcro circles, small wooden cutouts (one for each family member) and multiple permanent markers.

To make the containers

• Cut out a large enough rectangle to wrap around each container (mine are 6 by 8 1/2 inches)
• Next, lay out some cardboard/newspaper and spray a generous coat around one container. Wrap the rectangle around and repeat for the other two containers.
• If you have a cutting machine, you can cut out the numbers 1,2,3 for each container. If not, do what I did and cut them out of paper and glue them on.

The activitiesThis is actually the most time-consuming part. Using your judgment (and the Popsicle sticks) write down individual choices for each component. What, I didn't tell you what each container actually contains? Well... let me explain...

The containers hold a different part of FHE. Every week (or the week before after the evening's activity) draw one stick from each container.

Here's how to divide the containers:
1- Songs: In ours, I wrote the song title and the number found in the Children's Songbook. You could also do songs from the hymnbook.
2- Spiritual Thought: Things like family stories or names of books/magazines to get lessons from (such as the Friend, Ensign, Nursery Manual or Preach My Gospel).
3- The Night's Activity: This is where you could have a Family council, testimony meeting or evening at the Pool.

Don't forget the Wild Card in each container. If you have older kids, you could even create the options for your next FHE! We've had a month with this new system and our two year old loves to pick the sticks--- he even tries to throughout the week!

Lastly, stick velcro pieces all around the outside of your large container and on the back of your wooden cut outs (I have stars for our family). This will help you keep track of who's in charge of the three different containers, prayers and treats!

I hope this helps to make your Family Nights run a little easier--- I know ours have!

Birthday Gifts & Another Giveaway

My best friend's daughter turned two last week, so I made her a few presents:

A reusable Sticker book. I used{THIS} tutorial from {Samster Mommy}. It was really easy to make; in fact, I need to make my kiddos one too! The only thing I did different was the ribbon binding. Instead of using thin ribbon around each page I used my glue gun and a wide-ribbon (1 1/2 or wider) to fold it over to do two at once.

I also made her some felt bracelets:
I got the idea {HERE}, but didn't follow the tutorial at all. I wanted to make the bracelets more durable (they are for a toddler after all), so I doubled up the felt and used snaps instead. I also used a little bit of Heat 'n Bond to attach ribbon as well. I finished each off with a simple {blanket stitch}. When she grows out of them, she (or her mommy) can use them as bookmarks!

Finally, one of my FAVORITE craft blogs is giving away my soon-to-be FAVORITE tool--- the Silhouette, check out the giveaway {HERE} or just enjoy Somewhat Simple {HERE}.