Not decorating for it felt like a crime, so I dusted off my thinking cap and came up with a fun, easy and inexpensive door hang for our laundry room door (it must be passed by anyone entering/leaving our house---high traffic area).
Disclaimer: Excuse the pictures of the random steps in the process. I'm still getting a hang of the whole document-while-crafting thing. :)
Gather It:
- 3 wood stars
- Acrylic Paint
- 1 11x17 foam sheet (they're 1.99 at any craft store)
- 3 in wide ribbon, 29 inches long
- 1/2 wide ribbon, 3-5 inches long
- patriotic scrapbook paper and solid cardstock
- Red, White, and Blue Tulle (I got the 6 in' wide rolls at Hobby Lobby) you need 3 24 in strips
- Glue Gun, Mod Podge, and a couple felt scraps
- Before I start any explanations, one of the reasons I LOVED this idea (besides the fact that I came up with it) is that it is very versatile. Depending on your decor (and budget), you can do do one color of paint, tulle and scrapbook paper or you can do what I did and alternate it. It would be cheap to do the first option--- but the choice is yours!
- Paint your stars. I know it sounds like a cheesy song title, but do it anyway.
- While the stars are drying, trace and cut out circles in the paper and foam craft sheet. You'll need three paper circles and six foam circles. I used a kitchen bowl to find the circle size I wanted; it was 5 inches wide. Cut out the USA letters by either tracing them onto the cardstock or use your craft cutter (I used my Silhouette and used the "Lumos" font).
- Attach the paper circles to the foam circles using Mod Podge; wait 10 minutes to dry. Apply Mod Podge to the back of a letter and put one on each circle, then seal the whole thing with a top coat of Mod Podge.
- Now's the time to break out the glue gun. After the stars and circles are dry, apply glue liberally to the back of the foam circle and attach to the center of the star.
- (Reminder: I had a method to my color combinations. I had Red, White, and Blue in each star section. For example, the top star was Red with blue scrapbook paper and white lettering and tulle. Then White Star-Red paper-Blue lettering/tulle and Blue Star-'White' paper-Red lettering/tulle. You could just do all the stars one color, paper another and lettering/tulle the last, but I really liked the affect mine created).
- Next, glue the stars to the 29 in long ribbon. I started by taking a scrap piece of regular ribbon and scrap felt to create the loop to hang the creation. Then, about half way down the star, I applied hot glue TO THE STAR and attached the beginning of the ribbon. My stars were 4 inches apart from bottom corner to top point. In order to put the glue in the right place, I traced the ribbon down the middle back of the star and applied hot glue in that section. Repeat the same process with the third star.
- If you want, you can stop here. Hot glue the other foam circles to the back of each star to secure the ribbon and your done. I thought it needed something extra, enter the tulle. If you want to add the tulle, don't glue the back foam circles just yet.
- Take your 24 inch strips and cut them into 4 sections... that's 6 inches each. So you should have 4 6x6 squares of tulle for each star. At this time, cut a few more scraps of felt too. You need the felt to secure the tulle. See, I told you random picture of felt...
- Take one square and fold it accordion-style all the way across. Then, fold the square in half. Place your tulle in one of the four corners of the star and apply hot glue to the bottom of the tulle. Then, CAREFULLY apply the felt piece to secure the glue and tulle. Seriously, I had a few HOT moments because I decided to leave my finger on the felt a little too long. Repeat until each corner has a piece of tulle. Add the back circles and admire the extra Patriotic flare you gave your special high traffic door!